Assembler
Arnold Magnetic Technologies
Rochester, NY
Manufacturing / Production, Business Management / Project / Planning
Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs.
Duties And Responsibilities
- Maintains proper quality and quantities of manufactured materials.
- Operate small equipment such as presses, magnetizing/demagnetizing equipment, scanners.
- Perform SPC on all related jobs as required.
- Operate degreasing systems as required.
- Able to set-up equipment where applicable.
- Able to calibrate and zero equipment.
- Perform preventative maintenance.
- Use general measuring instruments, such as indicator, calipers, and height gages.
- Rotate from one job to another if needed.
- Maintain accurate documentation.
- Follows all established company policies
- Follows all established safety procedures and precautions. Including filing incident/accident reports.
- Notifies Supervisor of all unsafe/hazardous conditions or defective equipment.
- Other duties as assigned
- High School Diploma/GED
- Be able to follow written and oral instructions.
- Previous employed in a production environment helpful.
- Able to communicate.
- Math aptitude.
- Mechanical capabilities helpful.
- May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used.
- Plant wide climate control and air conditioning
- Could work in areas with excessive noise. NOTE: Ear protection available.
- Certain jobs extremely dirty. NOTE: Smocks or work outfits provided.
- Could require intermittent and long periods of sitting and/or standing.
- Required to do repetitive work.
- Periodic lifting of materials not to exceed 50 pounds.
A Shift:
Mon-Thurs: 5:30am-3:00pm
Fri: 5:30am-9:30am
#ROC
Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran
A Shift
Mon-Thurs: 5:30am-3:00pm
Fri: 5:30am-9:30am
About the company
Company website•Mining
Arnold Magnetic Technologies, headquartered in Rochester, N.Y., is a global manufacturer of permanent magnets, electromagnets, magnetic assemblies and thin metals. High performance materials from Arnold support motor systems that are smaller, lighter and more efficient while operating in high speed, high heat environments. Arnold ‘s advanced materials and magnetic assemblies serve a wide range of industries including aerospace & defense, automotive & motorsports, consumer & industrial, oil & gas, medical, and more.
Our products include RECOMA® samarium cobalt, Arnon™ electrical steel, Wraptite carbon fibre sleeving, Flexmag™ flexible magnet materials, Alnico, injection molded magnets, NdFeB assemblies, ferrite, compression bonded magnets as well as various ultra thin strip and sheet foils, electromagnets, and precision machined magnetic assemblies.
Arnold is a US-based corporation with several ITAR locations complying with DFAR throughout our supply chain. In addition, Arnold Magnetic Technologies holds certifications in ISO9001, AS9100, ISO ITAF 16949, and NADCAP™. For more information, visit Arnold Magnetic Technologies at http://www.arnoldmagnetics.com, or call us at 800-593-9127.
The Precision Thin Metals (PTM) business of Arnold Magnetic Technologies produces thin and ultra-thin alloys that improve the power density of motors, transformers, batteries and many other applications in Automotive, Aerospace, Energy Exploration, Industrial and Medical markets. For example, our Silicon Steels improve the power density of motors and transformers, our ultra-thin Ni, Al and Cu are helping in the development of tomorrow’s batteries, while our thin Titanium strip is both strengthening and lightening components used in the aerospace industry. Discover more about PTM here: http://www.precisionthinmetals.com
The Flexmag Industries division of Arnold manufactures flexible magnetic sheets, extrusions and strips. Discover more about Flexmag here: http://www.flexmag.com